Note: If this tutorial worked for you (and it should work), please leave a comment below. Thanks.
Rooting an Android device has many privileges. Having rooted your phone once, you are able to use third-party custom ROMs and mods that require a custom recovery to be installed. Besides, there are hundreds,or say thousands, of app that are capable of doing wondrous things and enhance your phones performance and usability. But this humble eulogy of rooting cannot undermine the hazards associated with it.
Disclaimer:
Please note that the procedure of unlocking the bootloader, rooting and installing a custom recovery on your Verizon Galaxy S3 SCH-I535 is considered risky. Moreover, it will also void the warranty of your phone. Proceed only when you are sure what you are going to do and understand the seriousness of things. More than anything, be careful in following the steps.
Prerequisites:
- Charge your phone to have at least 60% of battery juice.
- Rooting does not wipe any data from your phone but we would strongly recommend that you backup all your contacts, messages, call-log, apps, etc. Here are Some Good Free Apps to help you with backing up your data.
- Put your device in USB Debugging mode from Settings> Developer Options>
Since this tutorial is for Galaxy S3 I535 on Android 4.1.1 and 4.1.2 both, download the files accordingly- only different being the stock bootchain file. For the sake of convenience put all the downloaded files in one folder.
Root, Unlock Bootloader and Install CWM:
- Copy the “SuperSU_Bootloader_FIXED.zip” file to your phone’s internal or external SD card.
- Turn off your Galaxy S3 and boot it into Download mode: hold the Volume Down + Home + Power buttons simultaneously for a few seconds till you see a warning screen asking you to press Volume Up key to continue. Pressing this key will take you to Download or Odin mode.
- Open the Odin folder and run the .exe file present there and then connect your Galaxy S3 to PC via USB cable. Wait till Odin detects your device and you see ID:COM port turning Blue and “Added!!” text at the message box below.
- Now we will flash the custom bootchain file so make sure that “Auto Reboot” and “F Reset Time” are selected on Odin. Then click the PDA button and select the “VRALEC.bootchain.tar.md5″ file and click on “Start” button on Odin.
- The bootchain file will be flashed in a few seconds and you will see “RESET!!” message with blue signal. Your phone will reboot automatically. Close the Odin window and disconnect the USB cable.
- Now you need to install the ClockworkMod touch recovery. To install it, boot the phone into Download mode again (as you did in Step #2 above).
- Relaunch the Odin, connect the phone using the cable and uncheck the “Auto Reboot” option on Odin.
- Click on the PDA button, select the “CWM6023TouchVZW.tar.md5″ file and hit the “Start” button.
- CWM Recovery will be flashed to your phone followed by “PASS!!”. This time your phone will not reboot automatically. Close the Odin window.
- Now pull out the back cover of the phone and remove the battery. Place the battery to its place after about 30 seconds.
- Then boot the phone into ClockworkMod recovery mode. To do this, hold the Volume Up + Home + Power buttons simultaneously. Keep the 3 keys pressed till your phone vibrates and when it does, release the Power button but keep the other 2 keys pressed till you a gray background with blue text the clockworkmod recovery written on the top of the screen.
- Since it’s touch recovery, you can either select options by tapping, or using the volume and power keys.
- Okay, now go to “install zip from sdcard> choose zip from sdcard” and select the “SuperSU_Bootloader_FIXED.zip” file.
- Confirm your choice by selecting “yes’ and let the installation finish.
- When it’s done, go back and select “reboot system now”. But before your phone boots, pull out the battery and place it back after a few seconds.
- Once again, and for the third time. you will have to boot the device in Download Mode. You know well how to do it.
- Relaunch Odin, connect the phone to PC, click on PDA button and select the stock bootchain file (either VRBLK3 or VRBMB1) depending on what file you have downloaded.
- Click the “Start” button to initiate the installation. When it is finished, the phone will reboot automatically.
Written by Unknown
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 comments:
Post a Comment